It is possible to replace them without key development utilizing sheet laminate when your countertops are seeking worn. Sheeting is available in colours and several styles, and a few of the sheets that are newer mimic the appearance of natural stone. Sheeting is a bit difficult as well as versatile to set, and that means you may want to ask a few your buddies especially when you’re working using a lengthy counter-top to assist with all the project.
By sanding it off using a random orbital sander remove the shiny end in the laminate countertop. Sand it down, in the event the entrance of the counter-top has laminate trim. Remove all dust using a shop vacuum.
Measure width and the length of the counter-top. Add additional inches to equally to enable plenty of materials to you.
Place the face side down on a worksurface. Trace the the scale for the counter-top on the rear of the piece that is laminate. Use the wall of the long edges of the sheet as one in place of the front-edge of the counter-top.
Set masking tape over the fringe of of the line you drew in the prior stage. This makes it more easy to begin to see the line as you reduce and it AIDS in preventing the laminate from splintering and chipping.
Cut the materials with all the reverse side-up, utilizing a circular saw or jig saw with a fine toothed blade.
Contact cement of the counter-top using a paintbrush within the horizontal area. Coat the straight back of the sheet with con-Tact cement at the same time. Allow the con-Tact cement to set for the period of time advised by the producer before continuing. The con Tact cement will probably be tacky to the touch.
Set 1/4inch, or greater, dowel rods on the counter-top area perpendicular to the front edge. The rods prolong several inches past the very front of the counter-top and should achieve to the backwall. Space the rods 12″ apart. These assist as you set it in spot, you control the laminate. You require to a void the touching as well as the sheet before you have it positioned properly.
Turn over the sheet and spot it on the very top of the rods. Position the straight-edge from the back-wall.
Pull out the rod on one end-of the counter-top permitting the sheet to come connected together with the countertop. Roll the area using a Jroller to work air-pockets out. Pull out the rod that is next and press the laminate on the countertop. Before the laminate is in spot continue functioning your way over the whole duration of the counter-top. Roll the complete area with the Jroller to assure the contact cement is bonding.
Cut off excessive over-hang having a router along with a flush utilizing the fringe of of the counter-top as a manual.
Apply con-Tact cement to the aspect and entrance edges of the counter-top. Coat the straight back of edge strips with con-Tact cement. Let the contact cement become. Set the strips in spot along the countertop edges using the very top of the strip despite the countertop. Press strips to the contact cement using the Jroller.
Trim extra in the edge strips having a trim bit. Smooth tough edges having a half-roundfile.