How to Install a Deck Wash Kit on a Crafstman Riding Lawn (Salt Lake City, UT) Mower

When you mow, the bottom of the deck of a riding mower can become clogged with debris and Lawn Care service Fort Lauderdale. Since this accumulation can interfere with the safe and effective operation of the riding lawn for example in San Diego mower, it’s crucial that you remove it consistently. The simplest way to do so is by attaching a Grass Care service Fort Lauderdale, FL hose to the deck wash hole and turning on the water. Even when your Craftsman mower came without this convenient deck wash port, then it is possible to install yourself on the deck of the mower.

Park the lawn in Salt Lake City mower on a flat space, set the parking brake and remove the ignition key. Remove the spark plug from the spark plug so the mower’s engine can’t accidentally start.

Locate a flat, level space close to the center of the deck above the blades where you can set up the deck wash kit. Since the kits are generally designed to work on mower deck sizes of anywhere from 42 to 54 inches, the port must allow the spray to reach all parts of the deck readily when placed in a central location.

Remove the port cover from the deck around Craftsman models that include a port hole already drilled into them. For models without a pre-drilled port hole, then use the drill bit that is included in the deck wash kit to drill a hole.

Position the washout port on the deck at the port hole using the mounting bracket attached. Use the smaller drill bit that is included in the kit to drill a hole to the included bolt that secures the washout port and then mount to the deck. Secure the washout port to the deck by bolting it into position. Attach the hose adapter to the washout port by screwing it on the threaded port. Reattach the spark plug wire to the spark plug.